Hope Chest Woodworking Plans With Hidden Drawer
Correct now in the Wood Whisperer Club, we're building a Greene & Greene Blanket Breast. As designed, the interior of the chest only has 13 1/2″ in depth even though the entire piece stands at near twenty″. The reason for this is the fact that the case is propped upwardly on a substantial base consisting of a deck and a finger jointed frame. So in essence, in that location'southward a lot of wasted space under this bad male child.
Fifty-fifty though I provide a finished programme for Guild members to build from, everyone is encouraged to brand modifications that arrange their needs and tastes. It was pretty clear from the first that lots of folks wanted to redesign the piece slightly to recover some of that lost space.
I thought it over for a while and decided that a hidden drawer would exist a fun culling to more drastic solutions that might change the look to some degree. My initial idea was to have a drawer placed in the back which would issue in an obvious "drawer" to anyone who inspects the rear of the case. Not ideal. Thankfully, my buddy Aaron offered the perfect solution: use an entire side base piece as the drawer forepart. I quickly hopped into SketchUp and made it happen, about anyhow. Here are some of the highlights from the hidden drawer build.
I started by creating the drawer. Since the drawer front end is a pre-existing slice from the project, I needed to come up upwards with a strong joint that wouldn't change the look on the outside face or crave making a new function. Sliding dovetails were the respond. Using the router, I created both the male and female parts of the joint.
With the drawer parts cut to size, I began working on the frame. The frame not merely supports the drawer but also provides extra back up on the left side of the case, a chore previously done past our new drawer forepart. None of the joints for this part were particularly interesting, consisting of simple dados, rabbets and grooves.
Wooden drawer runners were installed without the demand for screws by gluing the runner stock into a groove that runs down the length of the framework. A like groove is cut into the drawer side. Considering a perfect fitting slide would actually be too tight for a drawer, the groove on the drawer side was cutting slightly wider past 1/32″ to allow for smoothen travel now and in the future. In the picture you'll see the drawer side on the left and the frame piece on the right.
All that was left was assembly. I glued each role in phases, making sure each role was nice and square. Because this subconscious drawer was not planned, I really didn't want to lose additional time to do-overs. Fortunately, the glueup went quite well. Below you'll see the finished assembly, open up and airtight.
With the deck in place, yous can encounter how the drawer will simply slide under without whatsoever obvious indicators of its presence. And with the example in place, the whole matter becomes fifty-fifty more obscured. Of course for this drawer to work at all, the blanket breast will need some anxiety to enhance it up off the basis slightly. I have hard surface flooring in most rooms of my house so I won't need more than than maybe one/8″ elevator. Anyone with carpet will accept to consider a more substantial ascension.
Now that I've told all of you well-nigh it, information technology certainly isn't much of a cloak-and-dagger. Simply I don't program on hiding anything in there other than maybe a few comic books. All in all, this was an unexpected and fun addition to the build. Being able to call up on your anxiety and blueprint on the fly is a useful thing indeed, though I highly recommend planning things out ahead of time if but to foreclose additional gray hairs, or loss of hair, as the case may exist.
Source: https://thewoodwhisperer.com/articles/the-not-so-secret-hidden-drawer/
0 Response to "Hope Chest Woodworking Plans With Hidden Drawer"
Post a Comment